Termékek cortilux prémium (9)

High resistance to Flash cure temperatures Extra strong adhesive at high temperatures Fast tack Long lasting adhesive It neither transfers nor stains the fabrics Suitable for all types of fabrics, especially the heavy ones Colourless

Osmocem SCK Fiber-reinforced monocomponent cement mortar, based on hydraulic binders, superprogoline fillers, selected fine aggregates and crystallizing reagent agents, which favor the penetration of the compound into the support. Ideal for low-thickness protective coatings (4 to 10 mm), with high counterweight adhesion. The specific formulation makes this product ideal for coatings in aggressive environments in contact with chlorides and sulphates (sewage systems). Packaging: 25 kg bag UM: €/kg

Miglioratore per fermalievitazione, adatto a paste lievitate, pani prelievitati o precotti destinati alla surgelazione. Formato:10 kg Dosaggio:1%

ECOFIX PLUS the best adhesive spray for printing boards ECOFIX PLUS is an high tack adhesive specially indicated for the textile silk-screen printing industry. It is suitable to keep the fabrics steady to their support while being printed. CHEMICAL BASE BASE: Synthetic rubbers and solid resins SOLVENTS: hydrocarbure group, benzen and omologous are absent PROPELLENT: Denaturate odourless hydrocarbure COLOUR: Yellow clear VISCOSITY: Middle IT DOES NOT CONTAINS CFC MAIN CHARACTERISTICS It does not transfer on the fabric or cloths printed. It does not dirty the fabrics. It is suitable for cotton, silk, wool, synthetic fabrics, cotton, mixed. It resists to many applications. It has a good resistance to heat. It is also suitable in embroidery industry to keep the cloth steady during embroidery. In the cut rooms it gets the adhesion of the model to the cloth during the cut. DIRECTIONS FOR USE Shake well the can before use. Spray the product from a distance of 25-30 cm. Remove it with wash solvent perchloroethylene.

Idropittura minerale antialga a base di silicati di potassio stabilizzato ed idrofobizzato, per la decorazione e protezione interna ed esterna di superfici sia nuove che vecchie, come intonaci base calce e cemento, intonaci base calce, intonaci deumidificanti, intonaci idrorepellenti, finiture minerali, intonaci a cappotto premiscelati, calcestruzzo. Elevatissima copertura, sicura inalterabilità agli agenti atmosferici ed ai raggi ultravioletti. Possiede caratteristiche di alta traspirabilità (infatti compatibile con sistema deumidificante) e allo stesso tempo caratteristiche di idrorepellenza. COLORE: Bianco e colori cartella CONFEZIONE: Fusto 4 - 14 lt UTILIZZO: Interno/Esterno DILUIZIONE: Pronto all'uso RESA: 7/8 mq/lt per mano COEFF. DI ASSORB. D'ACQUA CAPILLARE “W24”: < 0,10 kg/(mq*24 h½) RESISTENZA ALLA DIFFUSIONE DEL VAPORE m EQUIVALENTI “Sd”: = 0,08 m TEORIA DI KUENZLE “W*Sd”: < 0,01 kg/(mq*24 h½) CONFORME ALLA DIN 18363

A REAL REVOLUTION IN THE FASTENING AND ASSEMBLING TECHNOLOGY FOR SEALING, STICKING, FASTENING • Can be applied on every kind of metals and many other material • Very elastic and resistant, also against seawater • Quick polymerization, very high adhesive power • High abrasion resistance • Overpaintable and sandable • Without smell, not corrosive and not flammable • No shrinkage, no sag APPLICATION BRANCHES • Motor vehicles • Caravans, boats • Buildings CARCOFLEX 6600 represents a true revolution in the world of the one component, polyurethanic-based sealants. Our product is the result of the most complete synthesis of all characteristics, an adhesive sealant has to show, to be suitable for the auto transport, the artisanship, the building and the ship's branch.. In the specific auto transport branch the application fields are mainly the assembling of spoilers, chassis and profiles on the car, as well as the assembly of plate, plastic and wood parts on vans, ca

Powder spot cleaner spray, high quality. Suitable for cotton, knitted, wool, silk, synthetic, mixed fabrics It removes spot of: oil, dirt, grease, halos. Fast drying It does not leaves any halos, or rings Chlorinated-free Not toxic Eliminate it with a brush or compressed air It does not indeed the colours

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Liquid product based on lithium silicates, which was created for the protective, consolidating and porosity reducer treatment of concrete, mineral, brick and stone substrates. It guarantees optimal durability and adhesion strength, resistance to UV rays, chemical agents and mechanical stresses. The result of the application allows to obtain a rapid hardening of the surface as well as a revived and homogeneous appearance of the same. The product has a negligible environmental impact thanks to the low VOC content (<50 g / l) and is practically odorless. Protective, reinforcing, water repellent treatments of concrete, mineral and stone supports. Specific product for revitalizing, simultaneously providing a great consolidation and an annulment of the dust produced in concrete supports, interstices, brick, stone or mixed arches, present in taverns, public premises and of historic monuments interest. The application surfaces should be clean, free of incrustations, dust etc. A preliminary wash with distilled water or steam it's recommended. The support should be dry when applying. Apply the product as it is, with low pressure sprayer or brush with long bristles. Keep the substrate wet with Consilex Idrofix for at least 20 minutes during application. If applied on floors, wait 24 hours before passing on the treated support. The reinforcing contribution will be completed after 2-3 weeks of treatment. From 0,20 to 1,00 kg of Consilex Idrofix per square meter of surface to be treated, based on the porosity of the support.